<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="https://infomin.edicionescervantes.com/lib/pkp/xml/oai2.xsl" ?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
		http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
	<responseDate>2026-11-22T05:09:27Z</responseDate>
	<request identifier="oai:ojs.pkp.sfu.ca:article/143" metadataPrefix="oai_dc" verb="GetRecord">https://infomin.edicionescervantes.com/index.php/i/oai</request>
	<GetRecord>
		<record>
			<header>
				<identifier>oai:ojs.pkp.sfu.ca:article/143</identifier>
				<datestamp>2021-02-17T08:42:23Z</datestamp>
				<setSpec>i:AO</setSpec>
			</header>
			<metadata>
<oai_dc:dc
	xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/
	http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Laboratory benefit of an oxidized copper mineral</dc:title>
	<dc:title xml:lang="es-ES">Beneficio en laboratorio de un mineral oxidado de cobre</dc:title>
	<dc:creator>Gonzalez, Yessica</dc:creator>
	<dc:creator>Escobar, Christian</dc:creator>
	<dc:creator>Toro, Norman</dc:creator>
	<dc:subject xml:lang="en-US">Extraction of copper</dc:subject>
	<dc:subject xml:lang="en-US">copper oxides</dc:subject>
	<dc:subject xml:lang="en-US">chrysocolla</dc:subject>
	<dc:subject xml:lang="en-US">copper leaching</dc:subject>
	<dc:subject xml:lang="en-US">acid consumption</dc:subject>
	<dc:subject xml:lang="en-US">agglomerate and curing</dc:subject>
	<dc:subject xml:lang="es-ES">Extracción de cobre</dc:subject>
	<dc:subject xml:lang="es-ES">óxidos de cobre</dc:subject>
	<dc:subject xml:lang="es-ES">crisocola</dc:subject>
	<dc:subject xml:lang="es-ES">lixiviación de cobre</dc:subject>
	<dc:subject xml:lang="es-ES">consumo de ácido</dc:subject>
	<dc:subject xml:lang="es-ES">aglomerado y curado</dc:subject>
	<dc:description xml:lang="en-US">The benefit of a mineral was studied by determining its physical, chemical and mineralogical properties. The mineral studied had a total copper grade of 2.63% and a soluble copper grade of 2.61%. For the benefit of the mineral, it is first left in a granulometry with a P80 between 3/4 &quot;and 1/2&quot;, considering options to leach by agitation, by basins or by columns. The results obtained show that the tests carried out using the leaching technique by agitation are the most favorable for this type of material using an acid dosage of 60 g / L achieving practically 100% extraction compared to the other two methods where the same acid dosage is used, the pan tests were achieved a maximum extraction of 67% and for tests on columns 73% was achieved for an irrigation rate of 112 [L / m2 / h], later analyzes were carried out on the leaching rubble, obtaining the results of the remaining copper concentration Higher percentage the pan leaching technique, being the worst method for this material, on the contrary the agitation leaching obtains the best results with less or percentage of remaining copper in the gravel, reaching 1.05% of total copper.</dc:description>
	<dc:description xml:lang="es-ES">Se estudió el beneficio de un mineral determinando sus propiedades físicas, químicas y mineralógicas, el mineral estudiado presenta una ley de cobre total de 2,63% y una ley de cobre soluble de 2,61%. Para el beneficio del mineral primeramente se deja en una granulometría con un P80 entre 3/4” y 1/2”, planteado opciones de lixiviar por agitación, por bateas o por columnas Los resultados obtenidos entregan que las pruebas realizadas mediante técnica de lixiviación por agitación son las más favorables para este tipo de material utilizando una dosificación de ácidos de 60 g/L logrando prácticamente un 100% de extracción en comparación a las otros dos métodos en donde se utiliza la misma dosificación de ácido, la pruebas de batea se logró un máximo de extracción de 67% y para pruebas en columnas se logró un 73% para una tasa de riego de 112 [L/m2/h], posteriormente se realizaron análisis a los ripios de lixiviación obteniendo como resultados de concentración de cobre remante el mayor porcentaje la técnica de lixiviación en batea, resultando el peor método para este material, por el contrario la lixiviación por agitación obtiene los mejores resultado con menor porcentaje cobre remante en el ripio llegando a un 1,05% de cobre total.</dc:description>
	<dc:publisher xml:lang="es-ES">Centro de Investigaciones para la Industria Minero Metalúrgica (CIPIMM)</dc:publisher>
	<dc:date>2020-06-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>text/html</dc:format>
	<dc:format>application/zip</dc:format>
	<dc:format>application/epub+zip</dc:format>
	<dc:identifier>https://infomin.edicionescervantes.com/index.php/i/article/view/143</dc:identifier>
	<dc:source xml:lang="es-ES">INFOMIN; Vol. 12 (2020): enero-diciembre</dc:source>
	<dc:source>1992-4194</dc:source>
	<dc:language>spa</dc:language>
	<dc:relation>https://infomin.edicionescervantes.com/index.php/i/article/view/143/pdf</dc:relation>
	<dc:relation>https://infomin.edicionescervantes.com/index.php/i/article/view/143/html</dc:relation>
	<dc:relation>https://infomin.edicionescervantes.com/index.php/i/article/view/143/270</dc:relation>
	<dc:relation>https://infomin.edicionescervantes.com/index.php/i/article/view/143/epub</dc:relation>
	<dc:rights xml:lang="es-ES">Derechos de autor 2020 INFOMIN</dc:rights>
</oai_dc:dc>
			</metadata>
		</record>
	</GetRecord>
</OAI-PMH>
