Laboratory benefit of an oxidized copper mineral

Main Article Content

Yessica Gonzalez
Christian Escobar
Norman Toro

Abstract

The benefit of a mineral was studied by determining its physical, chemical and mineralogical properties. The mineral studied had a total copper grade of 2.63% and a soluble copper grade of 2.61%. For the benefit of the mineral, it is first left in a granulometry with a P80 between 3/4 "and 1/2", considering options to leach by agitation, by basins or by columns. The results obtained show that the tests carried out using the leaching technique by agitation are the most favorable for this type of material using an acid dosage of 60 g / L achieving practically 100% extraction compared to the other two methods where the same acid dosage is used, the pan tests were achieved a maximum extraction of 67% and for tests on columns 73% was achieved for an irrigation rate of 112 [L / m2 / h], later analyzes were carried out on the leaching rubble, obtaining the results of the remaining copper concentration Higher percentage the pan leaching technique, being the worst method for this material, on the contrary the agitation leaching obtains the best results with less or percentage of remaining copper in the gravel, reaching 1.05% of total copper.

Article Details

How to Cite
Gonzalez, Y., Escobar, C. and Toro, N. (2020) “Laboratory benefit of an oxidized copper mineral”, INFOMIN, 12. Available at: https://infomin.edicionescervantes.com/index.php/i/article/view/143 (Accessed: 20 November 2026).
Section
Artículos Originales

References

Benavente, O. 2010. Disolución de sistemas acuosos. Antofagasta: Universidad Católica del Norte, 37-52pp.

Cáceres, G. 2007. Introducción a la hidrometalurgia. Arica: Universidad de Atacama, 44-70pp.

Cárcamo, H. 2003. Operaciones mecánicas. Antofagasta: Universidad Católica del Minerals Engineering Norte, 46p.

Domic, E. 2001. Hidrometalurgia: Fundamentos, procesos y aplicaciones. Santiago de Chile: Andros Impresores, 174p.

Ilankoon, I. M. S. K.; Tang, Y.; Ghorbani, Y.; Northey, S.; Yellishetty, M.; Deng, X.; & McBride, D. 2018. “The current state and future directions of percolation leaching in the Chinese mining industry: Challenges and opportunities”.Vol. 125: Elsevier, Available:<https://doi.org/10.1016/j.mineng>,[Consulted: Junio 6, 2018].

Liu, M., Wen, J., Tan, G., Liu, G., & Wu, B. 2016. “Hydrometallurgy Experimental studies and pilot plant tests for acid leaching of low-grade copper oxide ores at the Tuwu Copper Mine”. Hydrometallurgy Vol. 165: Elsevier B.V., Available: <https://doi.org/10.1016/j.hydromet>, [Consulted: Abril 9, 2016].

Ntakamutshi, P. T., Kime, M. B., Mwema, M. E., Ngeda, B. R., & Kaniki, T. A. 2017. “Agitation and column leaching studies of oxidised copper-cobalt ores under reducing conditions”. Minerals Engineering, 111(February): 47-54, Available: <https://doi.org/10.1016/j.mineng>, [Consulted: Junio 1, 2017].

Schlesinger, M. E., King, M. J., Sole, K. C., & Davenport, W. G. 2011. Hydrometallurgical Copper Extraction. In Extractive Metallurgy of Copper pp. 281-322, Available: <https://doi.org/10.1016/b978-0-08-096789-9.10015-0>, [Consulted: Junio 1, 2017].

Sernageomin. 2017. Anuario de la mineria de Chile.

Reghezza, A. 1987. Aspectos tecnológicos de la Lixiviación. Concepción, Universidad de Concepción, 77-92pp.

Valenzuela-Elgueta, J., Jimenez, Y. P., Delgado, A. V., & Ahualli, S. 2019. Electrokinetics and stability of silica/clay mixtures at high copper concentration. Implications in the mining of copper. Minerals Engineering (Vol. 134). Elsevier , Available: <https://doi.org/10.1016/j.mineng>, [Consulted: Febrero 1, 2019].

Wu, A., Yin, S., Yang, B., Wang, J., & Qiu, G. 2007. Study on preferential flow in dump leaching of low-grade ores. Hydrometallurgy (Vol. 87). <https://doi.org/10.1016/j.hydromet.2007.03.001>, [Consulted: Febrero 1, 2019].