Tensorial model in equilibrium conditions in conformation processes
Main Article Content
Abstract
In engineering practice is usually worked with scalar, vector and tensor magnitudes. The tensors are used when power fields appear that generate tensional and deformational states. In the work a tensor model was developed that describes the equilibrium equations of a material point subjected to a deformational state in the process of hot metal rolling. Tensional and deformational states have been considered and the intervening field of forces is non-conservative. From the identification and calculation associated to the fields of forces carried out in the work, the formalization of tensional and deformational states is foreseen. Its application is projected to the rolling of sheet of steel in the roughing castle for the area of adherence, an area in which forces that intervene and that determine the displacement of the metal, tend to balance the linear component of this displacement.
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.
References
Askeland, D. R. 1998. Ciencia e ingeniería de los materiales, México: International Thomson Editores.
Cobas, G. G. 2014. Evaluación de las presiones específicas y las tensiones en la laminación de perfiles con una cara inclinada. Trabajo de Diploma, La Habana.
Chekmariov, A. 1970. Calibración de los cilindros de laminación. Moscú.
Derlinden, B. 2007. Thermomechanical processing of metalic materials. Mexico: S.I. Elservier.
Dieter, G. 1989. Mechanical Metallurgy. London: Mc. Graw Hill.
Feodosiev, V. 1965. Resistencia de materiales . La Habana: Pueblo y Educación.
Gómez, S. M. 2006. Guía técnica para la evaluación de riesgos y procedimientos de trabajo seguro en conformado de metales . Madrid: Paraninfo.
Groover, M. P. 2007. Fundamentos de manufactura moderna. Mexico: Mc Graw Hill.
Lankford, T. 1985. The Making Shaping and treating of Steel. New York: USA Us Steel Co.
Madías, J. 2008. Avances recientes en la laminación de productos largos. Actualización tecnológica, 42-47.
Méndez, J. H. 2006. Protección ambiental y producción más limpia parte 2. Tabloide universidad para todos, 3-6.
Minkin, B. A. 1989. Cálculo de sistemas elongadores . Moscú: MIR.
Morales, I. I. 2015. Curso de laminación, departamento técnico (U.E.B) Laminación . La Habana.
Olivella, X. O. 2000. Mecánica de medios continuos para ingenieros . Barcelona: UPC.
Plaza, A. D. 2000. Conocimientos básicos de laminación en caliente. Avilés: Grafinsa.
Selikov, A. L. 1982 Teoría de la laminación. La Habana: Pueblo y Educación.
Soto, H. 1987. Calibración de los cilindros de laminación. La Habana: Pueblo y Educación.
Stewar, J. 2002. Calculo con transcendentes tempranas. La Habana: Félix Varela.
Zolotorevski, B. C. 1973. Pruebas mecánicas y propiedades de los materiales. Moscú: MIR.