PHYSICAL-CHEMICAL DETERMINATIONS OF PETROLEUM, DERIVED HEAVY FUEL AND NANOPARTÍCULAS OF COMBUSTIONS

Article Sidebar

PDF (Español (España))
Published: Oct 31, 2018
Keywords:
Petroleum characterization chemical – physical techniques

Main Article Content

Jorge Frías Bullaín
Centro de Investigación del Petróleo

Abstract

In the investigation, a crude from Cuban Northern Heavy Oil Belt and its fuel oil fraction was characterized by chemical and physical techniques. Subsequent to the characterization of the derivative, MSI gas analyzer was performed, to identify and quantify concentrations of chemical species, in correspondence with EPA (2007) for external sources. Total suspended particles collected in filter holder were identified using the gravimetric method (ISO 9096),. With the intention of knowing the magnitude of polycyclic aromatic hydrocarbons reported in literature were chosen the higher and lower molecular mass and measured on the basis of its polar covalent radii. Total aromatic hydrocarbons were identified using activated charcoal with subsequent elution with n-hexane for analysis by ultraviolet spectroscopy in a Genesys 10 UV spectrophotometer. Environmental pollution control in the oil sector is evaluated in three states. The particles in the states mentioned above, whose dimensions are between (1-100) x10-9 meters are called nanoparticles. Nanotechnology currently offers firm steps in the development of different nanoparticles, which are applied directly to the mineralogical industry. Contributions stand out sharply operations: exploration, drilling and refining oil.

Article Details

How to Cite
Frías Bullaín, J. (2018) “PHYSICAL-CHEMICAL DETERMINATIONS OF PETROLEUM, DERIVED HEAVY FUEL AND NANOPARTÍCULAS OF COMBUSTIONS”, INFOMIN, 10(1), pp. 38–45. Available at: https://infomin.edicionescervantes.com/index.php/i/article/view/5 (Accessed: 28 September 2026).
Issue
Vol. 10 No. 1 (2018): enero-junio
Section
Artículos Originales

Those authors who have publications with this journal accept the following terms:

  1. The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
  • Share - copy and redistribute the material in any medium or format
  • Adapt - remix, transform and create from the material
  • The licensor cannot revoke these freedoms while complying with the terms of the license

Under the following conditions:

  • Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
  • NonCommercial - You may not use the material for a commercial purpose.
  • There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
  1. Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
  2. Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).

The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.

References

Abdelrahman Ibrahim E. D.2013. Aplicaciones de la Nanotecnología en la Industria del Petróleo y Gas: últimas tendencias mundiales y los retos futuros en Egipto, 1 (2) (2013): p.1.

D. Boysen Booker,R. 2005.Nanotechnology for dummies. 3º Edition. Wiley Publishing, Inc.; 2005.

NC TS 803: 2010. Calidad de aire – emisiones máximas admisibles de contaminantes a la atmósfera en fuentes fijas puntuales de instalaciones generadores de electricidad y vapor.

Quintili M. 2012. Nanociencia y Nanotecnología...un mundo pequeño, Maestría en Química Inorgánica, Centro de Estudios en Diseño y Comunicación, Brasilia 125-133p.

Salomons T.W. 2004. Organic Chemistry, Eighth Edition, University of South Florida, Deborah Brennan, 184-185 622-705 p.

Remy H. 1956. Treatise on Inorganic Chemistry, Segunda Edición Revolucionaria 1974, Germany: J. Kleinberg, Volumen I, 590-626 p.

Kagler S. H. 1969. Espectroscopic and Chomatographic Analysis of mineral Oil., Israel. 560 p.

Sanderson R. T.1967. Inorganic Chesmistry Arizona, Reinhold Publishing Corporation, 430 p.